Visit here for drapery measuring instructions.
Attachment Method:
- Belt Hook: Uses adjustable hooks attached to a sewn strap, offering more flexibility in fold adjustment.
- Snap Tape: Relies on pre-sewn fabric tapes that fit directly into carriers for precise spacing and movement.
Track Compatibility:
- Belt Hook: Offers a slightly smaller spacing (4 1/4 inches) for the matching track.
- Snap Tape: Has a spacing of about 2 1/8 inches for compatibility with TWOPAGES tracks.
Our ripple fold drapery is made to match our track, whose runner spacing is 8 cm by default. If you wish to use your own track, the runner spacing maybe different so that they may not match.
Click here to check specifications first!
TWOPAGES provides a matching Cato Traverse Rod that is perfectly suitable for ripple fold curtains.
If you need to apply your track, please consider the following factors.
1. Carrier Compatibility:
- For Snap Tape: Ensure the carriers are designed to slide smoothly into the fabric snap tape (spacing of about 2 1/8 inches).
- For Belt Hook: The track should support pin hooks and allow for hook adjustment at the necessary intervals.
2. Spacing Between Carriers:
- Snap Tape System: The spacing between the carriers should match the snap tape spacing (approximately 2 1/8 inches) for consistent folds.
- Belt Hook System: The suggested hook spacing is about 4 1/4 inches, and the track should allow for about 2 1/8 inches between each carrier.
3. Track Endcaps: Check if the endcaps on the alternative track are compatible with TWOPAGES curtains.
4. Weight Capacity: Make sure the existing track can support the weight of the ripple fold curtains.
Normally stacking width accounts for 20% of the ordered width. So we would like to remind you that if you want the window opening to show completely when the drapery is opened, please make sure to consider stacking width when you decide on rod length.
Spacing hooks between 4 1/4 inches is suggested.
200% fabric width is used for wave folds to create the finished width you order. Adding additional fabric to create fullness is unnecessary.
If the curtain finished length is over 108 inches, then the max finished curtain width without seam is 56 inches; if the curtain length is less than 108 inches, no seam for any curtain finished width. Otherwise, the width needs to be double-wide with a vertical seam.
