MeasureFit™ Guarantee
Last updated: November 17, 2026
At TWOPAGES, we want every custom window treatment to fit just right. If your covered product has a qualifying measurement issue, you may submit a MeasureFit™ claim within 60 calendar days of receiving it. Our team will review your request in accordance with the MeasureFit™ Guarantee.
1. Solutions for a Better Fit
An approved MeasureFit™ claim may qualify for a complimentary one-time remake at no additional product cost if the corrected dimensions fall within the applicable limits. If you accidentally entered the width and height in the wrong fields, you may request an exception by submitting the required photographs. Approved exceptions are covered under the same remake benefit. For covered drapery ordered too long that can be corrected by shortening, TWOPAGES may instead offer reimbursement toward local tailoring, as described in Section 4.1.
2. How to Submit a MeasureFit™ Claim
2.1 Submit the Claim Within 60 Days
Submit your claim within 60 calendar days after receiving the covered product by emailing support@twopagescurtains.com or calling +1 978-483-0998 or +1 978-248-8169.
2.2 Gather the Required Information
Before submitting your claim, re-measure your window following the applicable TWOPAGES Measuring Instructions. Use a rigid metal tape measure rather than a cloth or soft sewing tape.
Provide the following information and supporting photos:
- Your order number
- The dimensions shown on your original order
- The corrected window dimensions
- Clear photos showing the metal tape measure positioned directly against the window, with the measurement readings clearly visible
- A full-view photo of the affected product installed on the window, clearly showing the fit issue
2.3 Claim Review
TWOPAGES will review the original order details, corrected measurements, and submitted photographs to determine whether:
- The issue resulted from a customer measurement error;
- The product is eligible and has active MeasureFit™ coverage;
- The requested correction falls within the applicable dimensional limits or qualifies for an approved width-and-height transposition exception; and
- The appropriate resolution is local tailoring or a complimentary remake.
2.4 Confirm the Corrected Measurements
The customer must confirm the corrected dimensions before an approved remake is submitted for production.
3. Coverage Rules, Limits & Exclusions
3.1 Original Product Specifications
A remake must retain the same product style, fabric, color, and configuration as the original covered product. Only the approved dimensions may be changed.
For approved complimentary remakes within the applicable dimensional limits, no additional product charge applies, even if the corrected size is larger than the original. An approved width-and-height entry exception also qualifies for a complimentary remake at no additional product cost.
TWOPAGES covers standard replacement shipping for approved MeasureFit™ remakes. Expedited production and shipping are not available.
3.2 Dimensional Adjustment Limits
MeasureFit™ covers qualifying customer measurement errors, subject to the following dimensional limits:
- For eligible Shades and Blinds, the corrected width and height may each be up to 1 inch larger or smaller than the corresponding dimensions on the original order.
- For eligible Curtains and Drapery, the corrected width and height may each be up to 5 inches larger or smaller than the corresponding dimensions on the original order.
- If you accidentally entered the width and height in the wrong fields, an exception may be considered after reviewing the required photographs.
- Except for an approved width-and-height entry exception, corrections exceeding the applicable dimensional limits are not covered by MeasureFit™ and are not eligible for a remake under this guarantee. Paying a size difference does not make an out-of-limit correction eligible for MeasureFit™ coverage.
3.3 Product and Household Remake Limits
Under the TWOPAGES MeasureFit™ Guarantee, each covered product from your original order is eligible for a maximum of one (1) remake.
A maximum of four (4) total remakes per household over the customer's lifetime are permitted. The household limit does not reset annually. An approved width-and-height entry exception counts as one (1) remake toward both the covered product's limit and the household's four (4)-remake lifetime limit. Local tailoring reimbursements do not count toward either the one-remake-per-product limit or the household's four (4)-remake lifetime limit.
TWOPAGES reserves the right to determine household eligibility based on Customer ID, email address, shipping address, account history, or other reasonable identifying information.
3.4 Customer and Order Eligibility
MeasureFit™ is available only to personal residential customers.
MeasureFit™ does not apply to:
- Commercial projects
- Bulk orders containing 20 or more items in a single order
Coverage must be purchased separately for each eligible product. Coverage purchased for one product does not apply to another product in the same order.
3.5 Excluded Products
The following products are not eligible for MeasureFit™:
- Hardware
- Arch & Triangle Window Treatments
- Shutters
- Cornices
- Customer’s Own Material/C.O.M. products
4. Additional Rules & Special Handling
4.1 Local Tailor Hemming Reimbursement — Drapery Ordered Too Long
If the only fit issue is that covered drapery was ordered too long and shortening can correct it, TWOPAGES will prioritize a local tailoring solution instead of a factory remake.
To request approval, provide clear photos showing:
- A metal tape measure held directly against the window to verify the correct measurements; and
- The original curtain installed on the window to demonstrate the fit issue.
Once approved, have the affected panels hemmed by a local tailor or dry cleaner and submit the required receipt or proof of alteration. TWOPAGES will reimburse the actual approved alteration cost, up to $50 USD per covered panel.
4.2 Motorized Shade Remakes
When a covered Motorized Shade qualifies for a remake, TWOPAGES will provide and ship a complete new set, including a new motor, remote control, charger, brackets, and all accessories included with the original configuration.
The customer is not required to remove or reuse the motor or included accessories from the original Motorized Shade.
4.3 Original Product Disposition
Based on the product's original retail price before discounts:
- Under $600 USD: The customer may keep the original product.
- $600 USD or more: The customer must provide one of the following:
- A photo showing that a corner of the original product has been cut off;
- A photo showing that the care label has been cut off or removed; or
- A valid charitable-donation receipt.
The customer should not cut or donate the original product until TWOPAGES provides instructions.
4.4 Customer Measurement Errors vs. Manufacturing Errors
MeasureFit™ applies to qualifying customer measurement errors.
If the manufactured product dimensions do not match the confirmed order specifications, the issue will be handled under the applicable quality and manufacturing-error policy rather than MeasureFit™.
A confirmed factory production error does not count toward the household’s four-remake lifetime MeasureFit™ limit.
4.5 Shipping Damage, Loss & Missing Items
Shipping damage, package loss, missing cartons, missing products, and missing components are handled under the applicable Shipping Policy rather than MeasureFit™.
Shipping-related cases do not count toward the household’s four-remake lifetime MeasureFit™ limit.
5. Frequently Asked Questions
Q: How much does DIY MeasureFit™ coverage cost?
A: MeasureFit™ costs $19.99 per curtain panel or $29.99 per eligible shade. Coverage must be selected separately for each product you want to protect.
Q: Can I cancel MeasureFit™ Guarantee and get a refund?
A: Yes. You may contact TWOPAGES to request a refund of your MeasureFit™ Guarantee fee before your covered product is delivered. Once the refund is processed, your MeasureFit™ coverage will be canceled and no longer apply. After your product is delivered, MeasureFit™ coverage automatically takes effect, and the coverage fee becomes non-refundable.
Q: Who is eligible for MeasureFit™?
A: MeasureFit™ is available only to personal residential customers purchasing eligible products. Trade orders, commercial projects, and orders containing 20 or more items are excluded.
Q: Which products are excluded?
A: Products excluded from MeasureFit™ include hardware, Arch & Triangle Window Treatments, Shutters, Cornices, and Customer’s Own Material (C.O.M.) products.
Q: How many times can a covered product be remade?
A: Each covered product from your original order is eligible for one remake. An approved width-and-height entry exception also counts as one remake. A maximum of four total remakes per household over the customer's lifetime are permitted. Local tailoring reimbursements do not count toward either remake limit.
Q: How much can the measurements be corrected?
A: For eligible Shades and Blinds, the corrected width and height may each be up to 1 inch larger or smaller than the corresponding dimensions on the original order. For eligible Curtains and Drapery, the corrected width and height may each be up to 5 inches larger or smaller than the corresponding dimensions on the original order.
Q: What if I entered the width and height in reverse?
A: If you accidentally entered the width and height in the wrong fields, you may request an exception by submitting your original order dimensions, corrected dimensions, metal-tape-measure photos, and a full-view photo of the product installed on the window. If approved, the remake will not incur any size-related price difference but will count toward your one-remake-per-product limit and your household's four-remake lifetime limit.
Q: Will I have to pay more if the corrected size is larger?
A: For approved complimentary remakes within the applicable dimensional limits, you will not be charged a size-related price difference, even if the corrected size is larger. Approved width-and-height entry exceptions are also exempt from size-related price differences. Except for approved width-and-height entry exceptions, corrections exceeding the applicable dimensional limits are not covered by MeasureFit™ and are not eligible for a remake under this guarantee. TWOPAGES covers standard replacement shipping for approved MeasureFit™ remakes. Expedited service is not available.
Q: What if my covered curtains are too long?
A: When shortening can resolve the issue, TWOPAGES will prioritize local tailoring. Once approved, TWOPAGES will reimburse the actual approved alteration cost, up to $50 USD per covered panel.
Q: What happens when a Motorized Shade is remade?
A: An approved Motorized Shade remake is produced and shipped as a complete new set, including a new motor, remote control, charger, brackets, and other accessories included with the original configuration.
Q: What happens to the original product after a remake?
A: If the original retail price before discounts is less than $600 USD, you may keep it. If the original retail price before discounts is $600 USD or more, TWOPAGES will require a cut-corner photo, a cut or removed care-label photo, or a charitable-donation receipt.
Q: What if the factory made the product in a size different from my order?
A: That issue is handled under the applicable quality and manufacturing-error policy, not MeasureFit™. It does not count toward your household’s lifetime MeasureFit™ limit.
Q: What if my package is damaged, lost, or missing an item?
A: Shipping-related issues are handled under the applicable shipping-protection policy and do not count toward your household’s lifetime MeasureFit™ limit.