How to Measure Your U-Shaped Room Divider Curtain
Step 1: Measure Your Track Layout
Decide on the area to divide, then measure A, B, and C sides using the U-Shaped Track Section Guide diagram.
- A: Left side, from the corner to the track end.
- B: Center span, from corner to corner.
- C: Right side, from the corner to the track end.
Each side is available in 4/ 6/ 8/ 10/ 12 ft. Choose the size that best fits your space.
Finished curtain width is calculated automatically from the combined lengths selected for sides A, B, and C (A + B + C).
Step 2: Choose Your Suspension Rod Height
Suspension rods connect the track to the ceiling and hold it in place.
Select 10 inches or 22 inches, measured from the ceiling to the top of the track.
The top and bottom adjust bars allow approx. 2 inches of extra height in total:
- 10-inch rod: extends to 12-inch.
- 22-inch rod: extends to 24-inch.
Step 3: Calculate Your Finished Curtain Height
Finished curtain height is measured from the track runner eyelet to the bottom hem.
- Measure vertically from the ceiling mounting surface to the floor.
- Subtract your suspension rod height and 1¾ inches for the track and carriers.
- Round any fractional result UP to the next whole inch. Enter whole inches only.
Curtain height = Ceiling-to-floor height − Desired rod height − 1¾ inches
Example: For a ceiling-to-floor height of 108 inches and a desired rod height of 10 inches:108 − 10 − 1¾ = 96¼ inches. Round up and enter 97.
Double-check your selected track sizes, total curtain width, desired rod height, and finished curtain height before ordering.