How to Measure Drapery
How to Measure Shade
How to Install Drapery
How to Install Shade
How to Install Hardware
Influencer Picks
Inspired Spaces
Helpful Vision

How to Measure Drapery

How to Measure Pleated Drapery

1. Measure window width, door width or track length.

2. Decide panel quantity: Single Panel Width = Rod Track Full Length / Panel Quantity

3. Measure height.

4. Consider finish length: distance from floor.

How to Measure Grommet Drapery
  1. Measure window width/ door width/ track length.
  2. Decide panel quantity& fullness: Panel Width = (Rod Length × Fullness) / Panel Quantity.
  3. Measure height.
  4. Consider finish length: distance from floor.
How to Measure Soft Top Drapery

  1. Measure window width/ door width/ track length.
  2. Decide panel quantity& fullness: Panel Width = (Rod Length × Fullness) / Panel Quantity.
  3. Measure height.
  4. Consider finish length: distance from floor.

How to Measure Shade

How to Measure Inside Mount Shades/Blinds

  1. Check Depth: Measure the depth at the top of the window casing to ensure enough space for an inside mount.
  2. Width: Measure the window width at the top, middle, and bottom. Use the smallest measurement and subtract 3/8” for the order width.
  3. Length: Measure the window length on the left, center, and right. Use the largest measurement for the order length.
How to Measure Outside Mount Shades/Blinds

  1. Width: Measure the window width (outer edge to edge). If space allows, add extra 2-4 inches (1-2 inches on each side) for better coverage.
  2. Height: Measure the window height (outer edge to edge). If possible, mount the shade 10-12 inches above the frame for a balanced look.

How to Install Drapery

How to Install Drapery with Adjustable Pin Hooks

  1. Adjust Hooks: Set the pin hooks to your desired position.
  2. Insert Hooks: Push the pin hooks into the tape along the back of the pleat header (inside the seam) until fully secure.
  3. Attach to Rings: Hook the pins into the ring eyelets on the curtain rod.
How to Install 4-in-1 Header Styles

  1. Hook Belt: Insert the included metal hooks into the third pocket. Attach hooks to the ring eyelets on the drapery rod.
  2. Clip Ring: Snap the clip rings (not included) onto the header. Hang the rings onto the drapery rod.
  3. Rod Pocket: Pass the drapery rod through the 3-inch rod pocket at the top of the panel. Hang the rod in place.
  4. Back Tab: Align each back tab with the rod and slide them on in sequence. Hang the rod.
How to Hang Curtains in Pleated Headers

  1. Pinch Pleat / Tailor Pleat - Adjustable Pin Hooks
  2. French Pleat / Goblet Pleat / Inverted Pleated Box - Metal S-Hook
  3. Pinch Pleat with Back Tab - Adjustable Pin Hooks)
  4. Pencil Pleat - Wave Fold Hooks

How to Install the Ripple Fold Drapery with Tape Buckle

  1. Measure & Cut Track.
  2. Connect Track Pieces
  3. Insert Gliders
  4. Secure End Cord
  5. Attach End Cap
  6. Install the Brackets and Mount the Track
  7. Attach Buckles
How to Install Ripple Fold Drapery with Belt Hook

  1. Measure & Cut Track
  2. Connect Track Pieces
  3. Insert Gliders
  4. Secure End Cord
  5. Attach End Cap
  6. Install the brackets and mount the track.
  7. Insert Hooks
  8. Attach Hooks to Gliders
How to Install Ripple Fold Curtains with Jaylon Track

  1. Connect Rails
  2. Attach Hangers
  3. Lock Hangers
  4. Attach Hooks
  5. Mark Punch Positions
  6. Secure Brackets
  7. Attach Track to the Brackets
How to Hang Soft Top and Grommet Curtains

  1. Tab Top: Slide the curtain rod directly through the top tabs in sequence.
  2. Back Tab: Slide the curtain rod directly through the back tabs.
  3. Rod Pocket: Pass the curtain rod through the pre-sewn pocket at the top of the curtain.
  4. Flat Hooks: Insert First Hook - Space Hooks - Attach to Rings
  5. Grommet: Pass the curtain rod directly through the grommets.

How to Install Shade

How to Install Cordless Roman Shades Inside Mount

  1. Mark & Drill: Mark the mounting positions and drill holes.
  2. Secure Brackets: Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the installed brackets.
How to Install Cordless Roman Shades Outside Mount

  1. Mark & Drill: Mark the mounting positions and drill holes.
  2. Assemble Brackets: Attach the outer bracket and spacer with the bolt and nut.
  3. Screw the brackets into place.
  4. Attach headrail into place.
How to Install Cordless Roman Shades in Wooden Headrail

  1. Mark & Drill: Mark the mounting positions (align with headrail notches) and drill holes.
  2. Secure Brackets: Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets and secure with the wing nut.

How to Install Cord Lift Roman Shades Inside Mount

  1. Mark & Drill: Mark the mounting positions and drill holes.
  2. Screw the mounting brackets into place.
  3. Attach Headrail.
  4. Install Cord Cleat.
How to Install Cord Lift Roman Shades Outside Mount

  1. Mark the mounting positions and drill holes.
  2. Assemble Brackets.
  3. Screw the brackets into place.
  4. Attach headrail into place.
  5. Install Cord Cleat.
How to Install Cord Cleat for Roman Shades

  1. Attach Bead Chain: Clip the bead chain into the cord cleat.
  2. Secure Cleat: Screw the cord cleat to the window frame acoording to the cord position.
How to Install Woven Bamboo Shades Inside Mount

  1. Mark & Drill: Mark the mounting positions (align with headrail notches) and drill holes.
  2. Secure Brackets: Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets and secure with the wing nut.
How to Install Woven Bamboo Shades Outside Mount

  1. Mark & Drill: Mark the mounting positions (align with headrail notches) and drill holes.
  2. Secure Brackets: Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets and secure with the wing nut.
How to Install No-drill Woven Bamboo Shades Inside Mount

  1. Locate drill points with the inner bracket.
  2. Secure Inner Brackets.
  3. Attach Outer Brackets.
  4. Place the shade within the window frame.
  5. Fully tighten the nuts.

How to Install Motorized Roman Shade

  1. Mark & Drill: Mark the mounting positions and drill holes.
  2. Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets.
  4. Mark Remote Holder Position: Mark and punch a hole for the remote holder.
  5. Install Backplate: Secure the backplate with the “UP” side facing upward using screws.
  6. Attach Magnetic Holder: Install the magnetic holder onto the backplate.
  7. Secure Remote: Place the remote on the magnetic holder.

How to Control Motorized Roman Shade

  1. Power: Insert a battery into the remote (positive pole up).
  2. Pairing Shade to Remote.
  3. Set Upper & Lower Limits.
  4. Add Preferred Position.
  5. Switch Between Jog & Running Mode.
  6. Adjust Upper & Lower Limits.
  7. Delete All Limits.
  8. Speed Regulation.
  9. Pair Additional Emitter.
  10. Delete the added Emitter.
  11. Delete All Emitters.

How to Install Motorized Woven Bamboo Shade

  1. Mark the mounting positions and drill holes.
  2. Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets and secure with the wing nut.
  4. Mark Remote Holder Position: Mark and punch a hole for the remote holder.
  5. Install Backplate: Secure the backplate with the “UP” side facing upward with screws.
  6. Attach Magnetic Holder: Install the magnetic holder onto the backplate.
  7. Secure Remote: Place the remote on the magnetic holder.

How to Control Motorized Woven Bamboo Shade

  1. Charge the Motor Battery
  2. Power the remote: remove the back panel and pull out the insulating paper tab
  3. Pair the shade to the remote: for multi-chennel remote, select channel first
  4. Un-pair the shade from the Remote or channel
  5. Set or change middle stop limit
  6. Change upper and lower stop limit
  7. Reversing the roll direction
  8. Reorganizine shades on multi-channel remote
  9. Reset the shade motor: remove all shade stop limits and start over.
How to Install Alvin Roller Shades
  1. Mark & Drill: Mark the mounting positions and drill holes.
  2. Secure Brackets: Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets.
How to Install Woven Wood Roller Shades Cordless
  1. Mark & Drill: Mark the mounting positions and drill holes.
  2. Secure Brackets: Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets.
How to Install Flat Fold Roman Shade
  1. Mark & Drill: Mark the mounting positions and drill holes.
  2. Secure Brackets: Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets and secure with the wing nut.
How to Install Front Slat Roman Shade
  1. Mark & Drill: Mark the mounting positions and drill holes.
  2. Secure Brackets: Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets and secure with the wing nut.
How to Install Back Slat Roman Shade
  1. Mark & Drill: Mark the mounting positions and drill holes.
  2. Secure Brackets: Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets and secure with the wing nut.
How to Install Deco Fold Roman Shades
  1. Mark & Drill: Mark the mounting positions and drill holes.
  2. Secure Brackets: Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets and secure with the wing nut.
How to Install Day-Night Roman Shade
  1. Mark & Drill: Mark the mounting positions and drill holes.
  2. Secure Brackets: Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets and secure with the wing nut.
How to Install Top-Down Bottom-Up Roman Shade
  1. Mark & Drill: Mark the mounting positions and drill holes.
  2. Secure Brackets: Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets and secure with the wing nut.
How to Install Fan-shaped Corded Roman Shade
  1. Mark & Drill: Mark the mounting positions and drill holes.
  2. Secure Brackets: Screw the mounting brackets into place.
  3. Attach Headrail: Clip the headrail onto the brackets.
  4. Tighten Cord Cleat.
How to Install Valanced Day-Night Roman Shade
  1. Mark the mounting positions and drill holes.
  2. Screw the mounting brackets into place.
  3. Clip the headrail onto the brackets.
  4. Mark the cleat position and drill holes.
  5. Secure Cleat.
  6. Wrap the pull cord around the cleat and tighten cord cleat.
How to Install Zebra Roman Blind Cord Lift
  1. Mark the mounting positions and drill holes.
  2. Screw the mounting brackets into place.
  3. Clip the headrail onto the brackets.
  4. Mark the cleat position and drill holes.
  5. Screw the cord cleat into place.
  6. Wrap the pull cord around the cleat.
How to Install Austrian Shade Cord Lift
  1. Mark the mounting positions and drill holes.
  2. Screw the mounting brackets into place.
  3. Clip the headrail onto the brackets.
  4. Tighten Safety Buckle: Secure the safety buckle on the wall/window frame according to the cord position.

How to Install Hardware

How to Install Lora Track
  1. Measure the track length and cut it to size using a saw.
  2. Connect track pieces.
  3. Secure the end cap on one side of the track.
  4. Insert Carriers.
  5. Secure the end cap on the other side of the track.
  6. Secure the mounting brackets to the wall, and then attach the track to the brackets.
How to Install Jaylon Adjustable Curtain Rod with Rings
  1. Align Rod Pieces: Connect the rod pieces to the desired length.
  2. Measure and mark the mounting positions.
  3. Drill holes and secure the mounting brackets with screws.
  4. Slide the curtain rings onto the rod.
  5. Place the rod onto the brackets and tighten the screws to secure it.
  6. Screw the end cap onto the rod.
How to Install Jaylon Curtain Rod Set
  1. Align Rod Pieces: Line up the rod pieces.
  2. Measure and mark the positions for the brackets.
  3. Drill holes and secure the mounting bracket bases.
  4. Adjust the bracket length and tighten the screws.
  5. Secure the curtain rod to the brackets with screws. Tighten the end cap.
  6. Install holdbacks.
How to Install Jaylon Bay Window Rod
  1. Line up the rod pieces.
  2. Adjust the rod to desired angle and tighten the screws.
  3. Mark the mounting positions, then drill holes. Screw the brackets into place.
  4. Place the rod onto the brackets and tighten the screws to secure it.
How to Install Double Curtain Rod
  1. Measure and mark the mounting positions.
  2. Drill holes and secure the base bracket and center support bracket.
  3. Attach Finials.
  4. Place the rod onto the brackets.
  5. Pass the curtain rings and secure rod.
How to Install Drapery Wand
  1. Attach Wand to Ring: Hook the wand’s ring into the drapery ring.
  2. Hang Drapery Ring: Clip the drapery ring onto the curtain rod.

How to Install Jaylon Motorized Curtain Track

Inside Mount

  1. Measure and mark the mounting positions, then drill holes.
  2. Insert Anchors: Place expansive anchors into the drilled holes.
  3. Screw the mounting brackets into place.
  4. Attach Track: Clip the track onto the installed brackets.

Outside Mount

  1. Assemble Brackets: Attach the outer bracket to the spacer.
  2. Measure and mark the mounting positions, then drill holes.
  3. Insert Anchors: Place expansive anchors into the drilled holes.
  4. Secure Brackets: Screw the assembled brackets into place.
  5. Attach Track: Clip the track onto the installed brackets.

How to Adjust The Length of Jaylon Motorized Tracks (Length of 1.5m as Example)

  1. Unlock Master Carrier Buckle.
  2. Release Steel Tape.
  3. Push Carriers. Slide both carriers toward the master gearbox side.
  4. Remove Sub Gearbox. Open its buckle and detach it from the track.
  5. Adjust Positioner. Locate the white snaps, release the steel tape, and slide the positioner to the desired length.
  6. Connect Tracks.
  7. Reinstall Sub Gearbox. Attach it to the track and lock the buckle.
  8. Install Motor. Insert the motor into the track header, rotate 90° to lock, and power it on.
  9. Test Motorized Track. Ensure the track runs smoothly with the motor.
  10. Final Adjustments: rotate the hook to extend the track length (if needed) and adjust the number of runners.

How to Control Jaylon Motorized Curtain Track with App

  1. Power On Gateway: Plug in and power up the gateway device.
  2. Log into the TUYA/Smart Life App.
  3. Add Gateway: Tap the “Add Device” button in the upper right corner to search for and select the gateway device.
  4. Connect to Wi-Fi.
  5. Pair Motor: Turn on the motor and press the Set button 3 times.
  6. Add Motor to App.
  7. Complete Setup: Once paired, click “Next” and “Done” to finish.

How to Control Jaylon Motorized Track with Remote

  1. Install Battery
  2. Speed Adjustment
  3. Change Motor Direction
  4. Set Opening/Closing Limits
  5. Delete Opening/Closing Limits

Influencer Picks

Luxe Guest Room Makeover
Cozy Cottage Decorating
Home Updates with Bamboo Shades
Cozy Master Bedroom Decorating
Vintage Guest Room Makeover
Neutral Kitchen Styling
Early Winter Decor with TWOPAGES
Stunning Pantry Makeover
Primary Bedroom Make Over Moody Aesthetics
Neutral Living Room Updates
New Living Room Luxury Home Decor
Home Decor Ideas to Fall in Love with Your Home Again!
Simple Fall Styling for Dining Room
Dream Living Room Makeover
Before and After Window Makeover
Living Room Makeover with TWOPAGES Custom Curtains
Fall Home Projects & Decorating
A Detailed Look at How Our Curtains were Installed with Sarah!
Extreme Dining Room Makeover
Complete Master Bedroom Makeover with TWOPAGES
Decorate with TWOPAGES Roman Shade | Budget Friendly Custom Curtains
Making Over The Lobby with TWOPAGES Curtains
Blackout Curtains for Summer| Protected from Strong Sunlight and Glare
Compact Space Upgrade with TWOPAGES Roman Shades
Studio Apartment Makeover with TWOPAGES Roman Shades
The Most Affordable Custom Curtains| You Found the Best Ones
Modern & Neutral Decoration with TWOPAGES Curtains
Elevate your Space with Budget-friendly Custom Curtains

Inspired Spaces

Choosing the Right Shade of Drapes
Grommet Curtains
A Little Curtain History
Layering Window Treatments
Styling Under a Window
5 Ways to Make Your Bedroom Feel Luxurious
How to Incorporate Lines and Curves into Space
Library Tour: Creating A Cohesive Parlor
The Hues of Fall
Warm Winter Trends
How to Make Your Bed Like a Designer
Ways to Add Texture to a Single Space
Cozy Winter Shelf Styling
How to Choose the Perfect Drapery
Tips for an Organized Entry Way
Home Hack: Bigger Windows without DIY

Helpful Vision

How to Order on TWOPAGES Website
Tips before Buying Curtains
How Natural Woven Shades are Made
The Trim Border Crochet Machine is Working!
What Is Insulation Blackout Combo Interlining
What is Insulation Thermal Combo Interlining
How to Make Curtains More Luxury
TWOPAGES| Energizing Your Living Room
Decorate your Windows In a Natural Way
Dreamy Curtains for Dreamy Home
Dining Room Elevation eith TWOPAGES