Header Style Match Rod Track

Consider Fullness to Determine Width

The Rod length in this example is 80 inches.

Selected Hanging Header Style

Hanging Header Style

Pleated style

PINCH PLEAT
  • Pinch pleats are more gathered than other headings and have permanent sewn-in pleats for a more luxurious look. It is also called Double Pleated.
  • Panel width is the width that pleats already set. 200% fabric width is used for pleats.
  • It works for the track, traverse rod, channel rod, and pole with rings.
  • Comes with adjustable plastic pin hooks.
PINCH PLEAT WITH BACK TAB
  • A classic pleat pleat style with back tab.
  • Normally, the tab height is 8cm, fitting for rods with a diameter of 1.5 inches and below.
  • Comes with adjustable plastic pin hooks.
  • Can be hung on rings or rod directly. Pay attention to height measurement due to 2 different ways of hanging.
TRIPLE PLEAT
  • Triple pleats are more gathered than pinch pleats and have permanent sewn-in pleats for a more luxurious look.
  • Panel width is the width that pleats already set. 230% fabric width is used for pleats.
  • It works for the track, traverse rod, channel rod, and pole with rings.
  • Comes with adjustable plastic pin hooks.
TAILOR PLEAT
  • Tailor pleats are more gathered than other headings and have permanent sewn-in pleats.
  • Pleats space apart 5.5-6.5 inches.
  • Pleats adjustable pin hooks quantity: 10 pleats for 50 in width, 13 pleats for 72 in width, 15 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 27 for 150 in width.
  • Panel width is the width that pleats already set. 200% fabric width is used for pleats.
  • Metal pin hooks are not included. Only adjustable pin hooks are included.
  • Length is measured from the eyelet ring where the curtain hooks are attached to floor.
  • If rod or track length is 100 inches, then order 1 panel 100 inches width or 2 panels each 50 inches width.
  • It works for the track, traverse rod, channel rod, and pole with rings.
TRIPLE TAILOR PLEAT
  • Triple tailor pleats are more gathered than other headings and have permanent sewn-in pleats.
  • Pleats space apart 5.5 inches.
  • Pleats adjustable pin hooks quantity: 10 pleats for 50 in width, 13 pleats for 72 in width, 15 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 27 for 150 in width.
  • Panel width is the width that pleats already set. 230% fabric width is used for pleats.
  • Metal pin hooks are not included. Only adjustable pin hooks are included.
  • Length is measured from the eyelet ring where the curtain hooks are attached to floor.
  • If rod or track length is 100 inches, then order 1 panel 100 inches width or 2 panels each 50 inches width.
  • It works for the track, traverse rod, channel rod, and pole with rings.
GOBLET
  • Goblet pleats are more gathered than other headings and have permanent sewn-in pleats.
  • Pleats space apart 5.5 inches.
  • Pleats metal pin hooks quantity: 10 pleats for 50 in width, 13 pleats for 72 in width, 15 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 27 for 150 in width.
  • Panel width is the width that goblet pleats already are made. 200% fabric width is used for pleats.
  • Metal pin hooks are included.
  • Length is measured from the eyelet ring where the curtain hooks are attached to floor.
  • If rod or track length is 100 inches, then order 1 panel 100 inches width or 2 panels each 50 inches width.
  • It works for the track, traverse rod, channel rod, and pole with rings.
INVERTED BOX PLEAT
  • It is formed by two equal folds of fabric folded toward one another so they meet at the center of the pleat on the front of the fabric. It is what a box pleat looks like from behind.
  • Pleats space distance 5 inches.
  • Side hem 1 inch, bottom hem 3 1/8 inches.
  • S-shaped metal pin hook included.
  • Panel width is the width that pleats already set. 200% fabric width is used for pleats and folds to create 100% finished width you order.
  • Measure length from the eye ring to the bottom. Rod rings are not included, which are purchased separately.
  • 9 pleats for 50 in width, 13 pleats for 72 in width, 15 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 29 for 150 inwidth.
  • If rod length is 100 inches, order 2 panels each 50 inches width.
  • It works for rods with rings and track.
PENCIL PLEAT
  • Fabric is gathered tightly into folds that resemble the size and shape of a row of pencils.
  • In classic and versatile style, achieved by sewing a tape into the top of the curtain fabric, which is then drawn up using cords to create even pleats.
  • 220% fabric width is used for pleats and folds to create the finished width you order.
  • Plastic wrinkle band hooks are included.
  • Suits for pure linen drapery.
Pleats Space & Numbers for Various Width
  • ● The width and space of pleats may vary slightly depending on your track or pole length. Normally pleats space apart 5.5 inches. Provided you have special certain pleats spacing requirement, please let us know for custom made specially, you need pay extra charge fee.
  • ● Pleats pin hooks: 10 pleats for 50 in width, 14 pleats for 72 in width, 16 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 29 for 150 in width.
  • Rod Length (inch)
  • Per Panel Width (inch)
  • Fabric Usage (inch)
  • Numbers of rod rings & pleats
  • Pleats space apart distance(inch)
  • Stacked width (inch)
  • 26
  • 34
  • 40
  • 46
  • 52
  • 60
  • 72
  • 80
  • 88
  • 96
  • 100
  • 116
  • 128
  • 136
  • 140
  • 148
  • 156
  • 164
  • 176
  • 188
  • 192
  • 196
  • 216
  • 236
  • 250
  • 284
  • 296
  • 316
  • 356
  • 396
  • 15
  • 19
  • 22
  • 25
  • 28
  • 32
  • 38
  • 42
  • 46
  • 50
  • 52
  • 60
  • 66
  • 70
  • 72
  • 76
  • 80
  • 84
  • 90
  • 96
  • 98
  • 100
  • 110
  • 120
  • 127
  • 144
  • 150
  • 160
  • 180
  • 200
  • 34
  • 42
  • 48
  • 54
  • 60
  • 68
  • 80
  • 80
  • 87
  • 94
  • 98
  • 112
  • 123
  • 130
  • 134
  • 141
  • 148
  • 155
  • 166
  • 177
  • 180
  • 184
  • 202
  • 220
  • 233
  • 263
  • 274
  • 292
  • 328
  • 364
  • 4
  • 5
  • 5
  • 6
  • 7
  • 7
  • 9
  • 9
  • 10
  • 10
  • 10
  • 12
  • 13
  • 14
  • 14
  • 15
  • 16
  • 16
  • 17
  • 19
  • 19
  • 19
  • 21
  • 23
  • 25
  • 28
  • 29
  • 31
  • 34
  • 38
  • 4  3/4
  • 5
  • 5  1/2
  • 5
  • 4  3/4
  • 5  3/8
  • 4  7/8
  • 5  3/8
  • 5  1/8
  • 5  5/8
  • 5  7/8
  • 5  1/2
  • 5  1/2
  • 5  3/8
  • 5  1/2
  • 5  3/8
  • 5  3/8
  • 5  5/8
  • 5  5/8
  • 5  3/8
  • 5  3/8
  • 5  5/8
  • 5  1/2
  • 5  1/2
  • 5  3/8
  • 5  3/8
  • 5  3/8
  • 5  3/8
  • 5  1/2
  • 5  3/8
  • 3
  • 3  7/8
  • 4  3/8
  • 5
  • 5  5/8
  • 6  3/8
  • 7  5/8
  • 8  3/8
  • 9  1/4
  • 10
  • 10  3/8
  • 12
  • 13  1/4
  • 14
  • 14  3/8
  • 15  1/4
  • 16
  • 16  7/8
  • 18
  • 19  1/4
  • 19  5/8
  • 20
  • 22
  • 24
  • 25  3/8
  • 28  7/8
  • 30
  • 32
  • 36
  • 40
*For reference only, the actual measurement shall prevail.
For pinch pleat, tailor pleat, inverted pleat, and goblet style (Dimension in inches)
  • Finish Width
  • Fullness
  • Side Hem
  • Pleats Numbers
  • Pleat Depth
  • Side Tuck
  • Pleats Space
  • 25
  • 2
  • 1
  • 6
  • 1  1/4"
  • 2''
  • 5"
  • 30
  • 2
  • 1
  • 7
  • 1  1/4"
  • 2''
  • 5"
  • 40
  • 2
  • 1
  • 8
  • 1  1/4"
  • 2''
  • 5  3/4"
  • 50
  • 2
  • 1
  • 10
  • 1  1/4"
  • 2''
  • 5  5/8"
  • 60
  • 2
  • 1
  • 12
  • 1  1/4"
  • 2''
  • 5  1/2"
  • 70
  • 2
  • 1
  • 14
  • 1  1/4"
  • 2''
  • 5  3/8"
  • 80
  • 2
  • 1
  • 16
  • 1  1/4"
  • 2''
  • 5  1/4"
  • 90
  • 2
  • 1
  • 17
  • 1  1/4"
  • 2''
  • 5  5/8"
  • 100
  • 2
  • 1
  • 19
  • 1  1/4"
  • 2''
  • 5  5/8"
  • 110
  • 2
  • 1
  • 21
  • 1  1/4"
  • 2''
  • 5  1/2"
  • 120
  • 2
  • 1
  • 23
  • 1  1/4"
  • 2''
  • 5  1/2"
For triple pleat and triple tailor pleat style (Dimension in inches)
  • Finish Width
  • Fullness
  • Side Hem
  • Pleats Numbers
  • Pleat Depth
  • Side Tuck
  • Pleats Space
  • 25
  • 2.3
  • 1
  • 6
  • 1  1/4"
  • 2''
  • 5"
  • 30
  • 2.3
  • 1
  • 7
  • 1  1/4"
  • 2''
  • 5"
  • 40
  • 2.3
  • 1
  • 8
  • 1  1/4"
  • 2''
  • 5  3/4"
  • 50
  • 2.3
  • 1
  • 10
  • 1  1/4"
  • 2''
  • 5  5/8"
  • 60
  • 2.3
  • 1
  • 12
  • 1  1/4"
  • 2''
  • 5  1/2"
  • 70
  • 2.3
  • 1
  • 14
  • 1  1/4"
  • 2''
  • 5  3/8"
  • 80
  • 2.3
  • 1
  • 15
  • 1  1/4"
  • 2''
  • 5  3/4"
  • 90
  • 2.3
  • 1
  • 17
  • 1  1/4"
  • 2''
  • 5  5/8"
  • 100
  • 2.3
  • 1
  • 19
  • 1  1/4"
  • 2''
  • 5  5/8"
  • 110
  • 2.3
  • 1
  • 20
  • 1  1/4"
  • 2''
  • 5  3/4"
  • 120
  • 2.3
  • 1
  • 22
  • 1  1/4"
  • 2''
  • 5  3/4"
*For reference only, the actual measurement shall prevail.

Order Correct Width & Length

  • Panel width is the width that pleats already set. 200%-230% fabric width is used for pleats and folds to create finished width you order.
  • Length is measured from the eyelet ring where the curtain hooks are attached to floor.
  • If rod or track length is 100 inches, add possible overlap and gap privacy, then order 1 panel 100 inches width or 2 panels each 50 inches width.

Stacked Width

  • You might want window to show up completely when drapery is opened, in this case, you need consider stacked width to determine rod length. Normally stacking width account for 20% of drapery width.

Adjustable Pin Hook

  • Adjustable pin hook has a ratchet system to make them adjustable within 3 inches for height. Pin hooks are included, but drapery rod rings are not included.
  • Pin hook height 3.5 inches. Pleat depth 1 inch. White back tape width 3-1/8 inches. Side hem 1 inch, bottom hem 3-1/8 inches.

Hanging Header Style

Soft top

4-IN-1
  • Versatile 4-in-1 construction: Hook Belt, Rod Pocket, Back Tab and Clip Ring.
  • 3 inches rod pocket size.
  • Hook belt metal pin hook in 3 inches. 6 pin hooks per 40 inches width. Hooks included.
  • Side hem 1 inch, bottom hem 3 1/8 inches.
  • Measure length from the ring eyelet or top of the pole to bottom. Rod clip rings are not included.
  • If rod length is 100 inches, multiply by 150-200% width for folds, then order 2 panels each 75-100 inches wide.
  • It works for rods with rings, rod with clip rings and pole.
4-IN-1 Back Construction
  • Hook Belt: hang with metal pin hooks. (included)
  • Clip ring: hang with clip rings (not included)
  • Rod Pocket: hang with rod pocket for bunched-like look.
  • Back Tab: hang with back tab for pleated-like look.
FLAT HOOKS
  • Adjustable plastic hooks 3 inches. 6 pin hooks per 40 inches width.
  • Side hem 1 inch, bottom hem 4 inches.
  • Measure length from the eye ring to floor.
  • If rod length is 100 inches, consider 150-200% fullness to order more width for folds, order 2 panels each 75-100 inches wide.
  • It works for rod with rings.
TAB TOP
  • Tab height 4 inches, 6 tabs per 40 inches.
  • Side hem 1 inch, bottom hem 3-1/8 inches.
  • Curtain length is measured from the top of the pole to floor.
  • If rod length is 100 inches, consider fullness 120-200% width for folds, order 2 panels each 60-100 inches wide.
  • Velcro tab top allow to remove and install easily, and it is optional for outdoor curtains or room divider.
  • It works for rod.
ROD POCKET
  • Pocket 3 inches. Top flange is optional.
  • Side hem 1 inch, bottom hem 3-1/8 inches.
  • If rod length is 100 inches, consider 150% width for fullness, folds, order 2 panels each 75 inches wide.
  • It works for rod or rod with clip rings.
BACK TAB
  • Tab height 4 inches. Pocket size 3 inches.
  • 6 tabs per 40 in width, 8 tabs for 50 in width, 10 tabs for 72 in width, 12 tab for 84 in width, 15 tabs for 100 in width.
  • Side hem 1 inch, bottom hem 3-1/8 inches.
  • If rod length is 100 inches, order 200% fullness width for folds, then order 2 panels each 100 inches wide.
  • It works for rod or rod with clip rings.
GROMMET
  • Inside diameter 1.6 inches, outside diameter 2.25 inches.
  • 6 grommets for 42 in wide, 8 for 50 in, 10 for 72 in, 12 for 84 in, 14 for 100 in, 16 for 120 in, 22 for 150 in, 26 for 180 in.
  • Side hem 1 inch, bottom hem 3-1/4 inches.
  • Available Grommet Color: Antique Bronze, Aluminum, Nickle, Black

Ripple Fold

Ripple Fold Curtains with Belt Hook

  • The belt hook system uses a series of small hooks attached to a belt or strap sewn onto the curtain fabric.
  • Suggested spacing distance to insert the hooks:  about 5 inches/ 8 grids
  • Spacing distance for matching tracks: about 3 inches
  • Matching track height (distance from track top to carrier bottom): 2 inches
  • Adjustable hook space.
  • Pin hooks included.

Ripple Fold Curtains with Tape Buckle

  • Tape buckle system use fabric tapes that are sewn into the top of the curtain panels.
  • The tapes are designed to fit into specific carriers on a track that TWOPAGES provides, allowing for smooth, consistent movement across the window or door opening.
  • Tape buckle spacing distance: about 5 inches.
  • Matching track height(distance from track top to carrier bottom): 2 inches
  • Endcaps included.